Charging the Battery
The battery for the terminal is located inside the terminal.
An extended battery is available but is not provided as part of the viaDash
hardware. If an extended battery is purchased directly from the
manufacturer, and both batteries are attached to the terminal, the main
battery charges first and then the extended battery. If the extended battery
is placed in the terminal the power is drawn from the extended battery first
and then the main battery. Both batteries power the terminal independently
which provides the ability to “hot swap” the extended battery.
Power is switched from the extended battery to the main battery once the
level of capacitance is decreased to 3%. If the extended battery is pulled
from the terminal, the main battery will provide power to the terminal. If the
main battery power level is below 5% and the extended battery is pulled,
the terminal will revert to Standby mode.
For charging, use the Impatica viaDash console peripheral and the power
cables provided by Impatica Inc. Use of peripherals or cables not sold by
Impatica Inc. will void the warranty and may damage the terminal.
Charging the Batteries in the Impatica viaDash console
1. Connect the Impatica viaDash Console to the power supply provided
by Impatica Inc.
2. The battery packs begin charging immediately
3. Charge the batteries for four hours, then power on the terminal.
Note: The batteries will charge even if the terminal is in use as long as AC
is applied to the terminal.
Charging the Batteries in the Vehicle Cradle
1. Connect the vehicle cradle to the power supply or cigarette light
adapter provided by Impatica Inc.
2. Push the top brace down until the LED on the front of cradle lights solid
green to indicate that the terminal is properly seated.
3. The battery packs begin charging
Terminals are shipped with batteries completed discharged. Charge the
main battery pack and extended battery pack (if ordered) for a
minimum of 4 hours before initially using the terminal.
Checking the Battery Power
The battery power can be checked from two areas on the Impatica viaDash
console. The battery icon will provide a graphical representation of the
remaining battery power. If the internal battery and extended battery are
both attached, the power level is a cumulative charge of both batteries.
1. Tapping on the battery icon in the system task bar.
2. The power meter is also accessible via the control panel, tapping on
Comentários a estes Manuais